 |
 |
 |
 |
 |
 |
 |
ENGINEERING AND CONSTRUCTION OF AUTOMATIC CENTRIFUGAL WHEEL TYPE BLAST CLEANING MACHINES
Some proven applications:
- Descaling of hot forgings, hot stampings workpieces manufactured in steel or non-ferrous alloy.
- Descaling of hot-rolled profiles, tubes, sheets before painting.
- Finishing of cast light alloy wheel rims for automobiles and motorbikes.
- Shot-Peening of springs and mechanical elements for fatique life improvement.
- Cleaning, etching before painting of bicycle and motorcycle frames.
- Removal of refractory (ceramic) material from precision castings, and their deburring after cutting.
- Cleaning of tools: - after brazing of hard metal or cemented carbide inserts or tips - after heat treatment - before coating.
- Cleaning of die for aluminum extrusion industry.
- Cleaning of moulds for fabrication of glass containers.
- Cleaning of dies used for permanent low pressure and gravity die casting of light alloy components (automobile wheel rims, furniture parts, etc.).
- Cleaning, reconditioning of parts of automobiles such as: brakes, clutches, shock absorbers, sterring knuckles, all joints, etc.
- Mechanical artificial ageing for aesthetic purposes natural stone and resin or cement bond agglomerates.
- Deflashing of thermoset (sintered, and injection molded) plastics and fiberglass parts.
- Deburring, finishing of sintered metal (powder metallurgy) components.
- Deflashing, finishing of high pressure die castings (engine components, ornamental hardware, aircraft and missile components, etc.).
- Core knockout, cleaning (fettling) of ferrous and non-ferrous sand castings.
- Descaling of hot forgings, hot stampings workpieces manufactured in steel or non-ferrous alloy.
- Descaling of hot-rolled profiles, tubes, sheets before painting.
- Finishing of cast light alloy wheel rims for automobiles and motorbikes.
- Shot-Peening of springs and mechanical elements for fatique life improvement.
- Cleaning, etching before painting of bicycle and motorcycle frames.
- Removal of refractory (ceramic) material from precision castings, and their deburring after cutting.
- Cleaning of tools: - after brazing of hard metal or cemented carbide inserts or tips - after heat treatment - before coating.
- Cleaning of die for aluminum extrusion industry.
- Cleaning of moulds for fabrication of glass containers.
- Cleaning of dies used for permanent low pressure and gravity die casting of light alloy components (automobile wheel rims, furniture parts, etc.).
- Cleaning, reconditioning of parts of automobiles such as: brakes, clutches, shock absorbers, sterring knuckles, all joints, etc.
- Mechanical artificial ageing for aesthetic purposes natural stone and resin or cement bond agglomerates.
- Deflashing of thermoset (sintered, and injection molded) plastics and fiberglass parts.
- Deburring, finishing of sintered metal (powder metallurgy) components.
- Deflashing, finishing of high pressure die castings (engine components, ornamental hardware, aircraft and missile components, etc.).
- Core knockout, cleaning (fettling) of ferrous and non-ferrous sand castings.
C.M. Surface Treatment S.p.A. Via della Tecnica, 50 P.O. Box 38 Saliceto P. 41100 Modena Italy
Ph: +39.059.281652 Fax: +39.059.280505 P.I. 01918330364
info@cmspa.com
Ph: +39.059.281652 Fax: +39.059.280505 P.I. 01918330364
info@cmspa.com
